Using the MENU Command Sequence
31
2. Press the
TAKE
button.
The Displays show the messages:
set UNIT follow SYSTEM?
Press TAKE to execute
current:
breakaway
3. Press the
TAKE
button again.
The MATRIX Display momentarily shows this message, followed by the
status of the switcher and in the STATUS Display the letter “S” is
displayed behind the blinking cursor:
the UNIT is set in mode
FOLLOW system
If the status of the
VS-1616SDI
unit differs from that of the other unit(s), set
the
VS-1616SDI
unit to the
Follow-SYSTEM
mode. The MATRIX Display
blinks the new status of the switcher and the TAKE LED blinks. Pressing
the
TAKE
button
1
implements all the changes to the same state as the rest of
the system placing the switcher in the
Follow-SYSTEM
mode.
To set the
VS-1616SDI
unit to function in the
Breakaway-from-SYSTEM
mode:
1. Press the MENU button twice.
The MATRIX Display shows the message:
FOLLOW the system
yes -> TAKE, next -> MENU
2. Press the
TAKE
button.
The Displays show the messages:
BREAKAWAY from system?
Press TAKE to execute
current:
follow SYS
3. Press the
TAKE
button again.
The MATRIX Display shows the message:
the UNIT is set in mode
BREAKAWAY from system
8.3 Choosing the SWITCHING METHOD Setting
Section 8.3.1 describes the SWITCHING METHOD settings for stand alone
units and large matrices. Section 8.3.2 describes how to configure a
SWITCHING METHOD.
1 Pressing a different button cancels the operation and the switcher will remain in its previous state
