Operating Your SDI Video Matrix Switcher
19
Figure 12: Default Startup Status Display Sequence
7.2 Using the Front Panel Buttons
You can switch (see section 7.2.2) and clear (see section 7.2.3):
One input to one output
Several inputs to several outputs
One input to all outputs
7.2.1 Confirming the Settings
Choose to work in the
AT ONCE
mode or the
CONFIRM
mode:
In the
AT ONCE
(default
1
) mode:
Actions require no user confirmation
Execution is immediate
No protection is offered against changing an action in error
In the
CONFIRM
mode
2
:
You have an optional method to help avoid making a mistake
Every action requires user confirmation
Execution is delayed
3
until the user confirms the action
Protection is offered to prevent erroneous switching
You can key-in several actions and then confirm them by pressing
the TAKE button once, to simultaneously switch several monitors
1 For all actions except storing/recalling setups
2 The CONFIRM mode is the default for storing/recalling setups (see section 8.5)
3 Failure to press the TAKE button within about 30 seconds (the Timeout) will abort the action
