![background image](http://html.mh-extra.com/html/kramer/vs-1616sdi/vs-1616sdi_user-manual_2001302009.webp)
Your SDI Video Matrix Switcher
5
Table 2: Front Panel VS-1616SDI 16x16 SDI Video Matrix Switcher Features
#
Feature
Function
1 IR Receiver
The red LED is illuminated when receiving signals from the
Kramer Infra-red remote control transmitter
2
Power
Switch
Illuminated switch supplying power to the unit
3
ALL
Button
Pressing
ALL
followed by an
INPUT
button, connects that input to
all outputs
4
OFF
Button
An
OFF
-
OUT
combination disconnects that output from the inputs;
an
OFF
-
ALL
combination disconnects all the outputs
5
IN
Buttons
Select the input to switch to the output
6
OUT
Buttons
Select the output to which the input is switched
7
STO
Button
Stores the current setting in the non-volatile memory
8
RCL
Button
Recalls a setup from the non-volatile memory
9 LCD
MATRIX
Display
1
Displays the selected input(s) switched to the output(s) (above or
below the corresponding
OUTPUT
label) and user interface
messages
10 LCD
STATUS
Display
1
Displays the matrix status (input to output connections)
11
MENU
Button
Selects the programming commands to setup the switcher
12
TAKE
LED
Shows the current TAKE button mode
13
TAKE
Button
Used to confirm and complete setup and switching
Table 3: Rear Panel VS-1616SDI 16x16 SDI Video Matrix Switcher Features
#
Feature
Function
14
DIGITAL
Space for optional digital Genlock input board with BNC
Connector
15
EXT. SYNC
BNC Connector
Connects to the external sync source
16
ANALOG
BNC Connector
Connects to the analog Genlock source
17
75
Analog Genlock Button
Press to terminate at 75 or release for looping
2
18
EXT.
(extension)
KEYS
Terminal Block Connectors
Connects to an external keyboard (remote unit)
19
RS-485
Detachable Terminal
Block Port
Pins # 1 and # 2 are for vertical sync and Ground connection, and
Pins # 3 and # 4 are for RS 485
20
RS-232 IN
DB 9F Port
Connects to the PC or the Remote Controller
3
21
RS-232 OUT
DB 9M Port
Connects to the RS-232 IN DB 9F port of the next unit in the
daisy-chain connection
22 SETUP Dipswitches
Dipswitches for setup of the unit
23 Power Connector with
Fuse
AC connector enabling power supply to the unit
24
INPUTS
BNC Connectors
Connect to the digital video sources
25
OUTPUTS
BNC Connectors
Connect to the digital video acceptors
1 In sections 7.2.4 and 8, the word “Displays” refers to the LCD MATRIX and STATUS Displays
2 Push in to terminate the sync line. Push out when the sync line extends to another unit
3 If the unit is not the first unit in the line, connects to the RS-232 OUT DB 9F port of the previous unit in the line