Using the MENU Command Sequence
35
8.5 Setting the STORE/RECALL KEYBOARD Mode
Choose one of these STORE/RECALL KEYBOARD modes:
At ONCE mode in which setups are stored/recalled immediately
without the need for user confirmation
CONFIRM mode in which storing/recalling setups require user
confirmation. The CONFIRM mode is the default
1
for
storing/recalling setups and is recommended to prevent
erroneously storing/recalling of setups
To set the STORE/RECALL KEYBOARD mode to the AT ONCE mode,
instead of the CONFIRM (default) mode, do the following:
1. Press the MENU button until reaching the STORE/RECALL setting.
The MATRIX Display shows the message:
STORE/RECALL setting
yes -> TAKE, next -> MENU
2. Press the
TAKE
button and choose the appropriate Outkey 1 for the AT
ONCE mode (Outkey 2 is for the CONFIRM mode).
The Displays show the messages:
STO/RCL mode
changed
current:
At once
8.6 Choosing What to INDICATE
Choose what is displayed during regular operation: between scrolling the
switcher setup as Figure 15 illustrates, and showing the IN/OUT range
2
.
Figure 15: Choosing what to INDICATE
1 The AT ONCE mode is the default for all actions except storing/recalling setups
2 Useful in an expanded matrix configuration
