KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-747
26
Table 5: Preview and Program Setting OSD Menus
Setting
Function
Selection/Range
Default
Input Sub-menu
Source
Select the input source
Channel 1 to 8
Channel 1
Type
Set the video type
RGBHV, RGBS
(PC/Video), RGsB
(PC/Video), YCbCr, Y/C or
video, HDMI (for input 1
and input 2 only)
RGBHV
Video Standard
Set the Video standard
Auto, NTSC, PAL,
PAL-M, PAL-N, NTSC
4.43, SECAM or PAL 60
Auto
H-Position
1
Set the horizontal position
2
V-Position
1
Set the vertical position
Frequency
1
Adjust the frequency
3
Phase
4
Adjust the phase
0 to 31
0
Auto Image
Assesses the image and improves the quality
accordingly, by automatically adjusting the
phase, frequency and position. Upon
completion, the relevant OSD values are
updated (H-Position, V-Position, Phase and
Frequency)
Overscan
Allows stretching of the outputted picture
On or Off
On
Picture Sub-menu
Brightness
Adjust the brightness
-50 to 50
0
Contrast
Adjust the contrast
-50 to 50
0
Color
Adjust the color
-50 to 50
0
Hue
Adjust the hue
-180 to 180
0
Sharpness
Adjust the sharpness
-50 to 50
0
Output Gamma
Adjust the gamma
1 to 4
1
Film Mode
Set the film mode
Auto, Video or Film
Auto
Temporal NR
5
Set the temporal noise reduction level
Off, Low, Medium or High High
Mosquito NR
5
Set the Mosquito noise reduction level
Off, Low, Medium, High
Low
Block NR
5
Set the block noise reduction level:
Off or On
High
Detail
Enhancement
5
Set the detail enhancement
Off, Low, Medium or High Off
Luma Transition
Enhance
5
Set the luminance transition enhance level:
Off, Low or High
Low
Chroma Transition
Enhance
5
Set the chrominance transition enhance level:
Off, Low or High
Low
1 The range changes according to the input mode
2 For UXGA and component video inputs
3 For UXGA inputs
4 Only for a VGA Source
5 You do not have to press ENTER after selecting the desired parameter to change it