KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
4
embedded audio on the two HDMI inputs and output
•
Built-in noise reduction and picture enhancement features
•
Audio inputs – selectable S/PDIF or balanced audio input for each of the two
universal video inputs, for each of the four PC video inputs on 5-pin terminal
blocks; and embedded audio on the two HDMI inputs
•
Audio outputs - S/PDIF (RCA connector) and balanced stereo audio (5-pin
terminal block). Transcodes stereo or S/PDIF audio to both stereo and S/PDIF
audio and embeds audio onto the HDMI output
•
Built-in Time Base Corrector - stabilizes video sources with unstable sync
•
Built-in video Proc-Amp - color, hue, sharpness, contrast, and brightness are set
individually for each input
•
A BLANK button, a FREEZE button, a RESET TO XGA/720P button (to
hardware-reset the output resolution); and a PANEL LOCK button
1
•
Built-in audio Proc-Amp - with bass, treble, balance and loudness control, as
well as audio delay
•
Supports firmware upgrade
2
•
Firmware upgrade for audio via the designated 3-pin RS-232 AUDIO PROG.
connector
via the USB port
•
A slideshow feature, letting you run a slideshow via the USB port
•
A user-friendly OSD (On-Screen Display) that can be centered on the screen or
in one of the four corners
In addition, the
VP-730
:
•
Includes non-volatile memory that retains the last settings, after switching the
power off and then on again
•
Digitally reprocesses the signal to correct mastering errors, and regenerates the
video at the appropriate higher (or lower) line and pixel rate format, providing
native-resolution video for LCD, DLP and plasma displays
•
Is specifically designed to improve video quality by reducing chroma noise
•
Includes numerous filters and algorithms for eliminating picture artifacts
•
Scales and zooms (to up to 400% of the original size)
•
Can provide non-linear scaling for 4:3, 16:9 transformation
Control your
VP-730
directly via the front panel push buttons, or:
•
By RS-232 serial commands transmitted by a touch screen system, PC, or other
serial controller
•
Remotely, from the infrared remote control transmitter (with on-screen menus)
1 The front panel blank, freeze and lock buttons can be programmed via the OSD menu (see
Table 15
)
2 To check if firmware upgrades are available, go to our Web site at
http://www.kramerelectronics.com