KRAMER: SIMPLE CREATIVE TECHNOLOGY
Presentation Switcher / Scaler Buttons
18
7.2.4
Quick Selection of the PIP Source via the Front Panel Buttons
For quick selection of the PIP source, press and hold the PIP front panel button
while pressing the input button of the required PIP source. For example, to select
PC 2 as the graphic PIP source over a video background, press and hold the PIP
front panel button and press the PC 2 front panel button.
When attempting to select a PIP source of the same category as the background
source (for example, video on video, which is not compliant to
Table 3
),
a message appears: “unavailable operation”
To replace a PIP in the same category (for example, changing the PIP source
from PC 1 to HDMI 2), press the required PIP Source on the remote control
transmitter
1
You can swap the PIP source category with the main source category via the:
and the PIP display will change accordingly.
•
Remote control keys, by selecting a new main source and then a new PIP source
•
OSD menu, by selecting a new Input source through the Input menu and a new
PIP source through the PIP menu
When selecting one PIP source, the
VP-730
automatically recognizes and
displays the selected graphic PIP source on all the video displays
2
2
and the
selected video source on all the graphic displays, compliant to
Table 3
.
1 The front panel U
NIVERSAL
I
NPUT
selector buttons I
N
1 and I
N
2 are named Input 1 and Input 2, respectively, on the IR
remote control transmitter. Similarly, the front panel I
NPUT
selector buttons PC 1, PC 2, PC 3 and PC 4, are named VGA 1,
VGA 2, VGA 3 and VGA 4, respectively, on the IR remote control transmitter (see section
7.4
)
2 Even if the input signal is not connected. In this case the PIP appears over a blank screen