![background image](http://html.mh-extra.com/html/kramer/vp-31ksi/vp-31ksi_user-manual_2002209035.webp)
Kramer Protocol
31
14 Kramer Protocol
Section 14.1
describes how to switch between Protocol
1
By default, the
VP-31KSi
is set to protocol 3000 (see
Section
3000 and Protocol 2000.
14.2
) but is also
compatible with Kramer’s Protocol 2000 (see
Section 14.3
).
14.1 Switching Protocols
You can switch protocols either via the front panel buttons (see
Section 14.1.1
) or
the protocol commands (see
Section 14.1.2
).
14.1.1 Switching Protocols via the Front Panel Buttons
To switch from protocol 3000 to protocol 2000 via the:
•
Front panel buttons, press the IN 1 and IN 2 button simultaneously
•
Infrared remote control transmitter, press the TAKE button and then 13
To switch from protocol 2000 to protocol 3000 via the:
•
Front panel buttons, press the IN 1 and IN 3 button simultaneously
•
Infrared remote control transmitter, press the TAKE button and then 16
14.1.2 Switching Protocols via Protocol Commands
To switch from protocol 3000 to protocol 2000, send the following command:
#P2000<CR>
To switch from protocol 2000 to protocol 3000, send the following command:
0x38, 0x80, 0x83, 0x81
The Windows
®
-based Kramer control software
2
operates with Protocol 2000.
If the
VP-31KSi
is set to Protocol 3000, it is automatically switched to
Protocol 2000.
14.2 Kramer Protocol 3000
This RS-232/RS-485/Ethernet communication protocol
3
11.1
lets you control the
machine from any standard terminal software (for example, Windows
®
HyperTerminal Application). For serial communication parameters, see
Section
.
1 You can download our user-friendly “Software for Calculating Hex Codes for Protocol 2000” from the technical support section at
http://www.kramerelectronics.com
2 Download the latest software from our Web site at
http://www.kramerelectronics.com
3 Not available at the time of printing. Refer to our Web site
http://www.kramerelectronics.com
for details