![background image](http://html.mh-extra.com/html/kramer/vp-31ksi/vp-31ksi_user-manual_2002209022.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-31KSi Locally via the Front Panel Buttons
18
5.9.2 Connecting via a Network Hub, Switch, or Router
You can connect the Ethernet port of the
VP-31KSi
to the Ethernet port on a
network hub, switch, or router, via a straight through cable with RJ-45 connectors.
The
VP-31KSi
Ethernet port has to be configured to be compatible with your
network (see
Section 5.9.3
).
5.9.3 Configuring the Ethernet Port on the VP-31KSi
To configure the Ethernet port on the
VP-31KSi
, use the
K-Upload
software
1
6
Operating the VP-31KSi Locally via the Front Panel Buttons
. For
instructions on using the
K-Upload
software, refer to the
K-Upload Software
Guide
.
Powering up the
VP-31KSi
recalls the previous settings (that is, the state of the
unit when it was powered down) from the non-volatile memory.
6.1 Using the Front Panel INPUT SELECTOR Buttons
Table 5
describes the input selector button illumination descriptions.
Table 5: Button Illumination Descriptions
Button Color
Selected Input
Input Signal Detected
Red (video and audio)
Yes
No
Green (video)
No
Yes
Purple (video)
Yes
Yes
Button does not light
No
Yes or no
When a video input signal is detected, the button lights green. No audio signal
detection is performed.
When an input is selected (whether video or audio) and an input signal is detected,
the button lights red.
When a video signal is detected and the input is selected, the button lights purple.
To switch an input to the output, press one of the three front panel INPUT
SELECTOR buttons. The INPUT SELECTOR button lights (see
Table 5
) and
switches the input simultaneously to both the VGA and CAT 5 TP outputs.
6.2 The Audio-Follow-Video and Breakaway Modes
When the
VP-31KSi
operates in audio-follow-video mode, all operations relate to
both the video and audio. When in this mode, both the VIDEO and the AUDIO
buttons are lit.
1 Available from
http://www.kramerelectronics.com