![background image](http://html.mh-extra.com/html/kramer/vp-31ksi/vp-31ksi_user-manual_2002209015.webp)
Connecting the VP-31KSi 3x1 UXGA/Audio STEP-IN Switcher
11
To connect remote input selection switches as the example illustrated in
Figure 6
:
1. Connect Switch A to pins 1 and G (ground) on the terminal block.
2. Connect Switch B to pins 2 and G on the terminal block.
3. Connect Switch C to pins 3 and G on the terminal block.
5.3 Connecting the SI-1VGA Remote Step-in Module
For detailed instructions refer to the
SI-1VGA
Step-in Module Installation
Instructions
1
To connect an SI-1VGA remote step-in module to the VP-31KSi as illustrated
in the example in
.
Figure 7
:
1. Mount the
SI-1VGA
in either the
TBUS-10
or the
K-POD301
.
2. Using a 15-pin HD (male to male) cable
2
3. Using an audio cable with 3.5mm mini jacks at both ends
, connect the 15-pin HD connector
on the rear of the
SI-1VGA
to the corresponding input on the rear of the
VP-31KSi
.
3
4. Repeat steps 2 and 3 for each
SI-1VGA
remote step-in module.
, connect the
3.5mm mini connector on the rear of the
SI-1VGA
to the corresponding audio
input on the rear of the
VP-31KSi
.
Figure 7: Connecting the SI-1VGA
1 Available for download from
http://www.kramerelectronics.com
2 For example, Kramer C-GM/GM
3 For example, Kramer C-A35M/A35M