![background image](http://html.mh-extra.com/html/kramer/via-go/via-go_user-manual_2000839034.webp)
28
VIA GO - Using VIA GO
VIA GO
is activated by default in “Standalone Wi-Fi” mode.
In this mode, the device creates an autonomous Wi-Fi network (SSID) named
“
VIA_WI-FI
”. The default password of this SSID is “
123456789
”.
You can change the default SSID to create your own one and select your preferred
Wi-Fi channel for this network. You can also toggle the “On/Off” button to
completely deactivate the built-in Wi-Fi module.
Here the Wi-Fi setup options available in this mode:
1. Setup your Wi-Fi module as a secondary Access Point (for guests) and
“Enable Internet” for these users (if the primary LAN network is connected to
the Internet).
2. Select “Standalone Wi-Fi” to create an autonomous network (without
Internet access).
3. Once defined as required, click
Apply
before rebooting your device.
Summary of Contents for VIA GO
