![background image](http://html.mh-extra.com/html/kramer/via-go/via-go_user-manual_2000839049.webp)
VIA GO - Using VIA GO
43
1. Open the
VIA GO
client and enter the location (IP address of the
VIA GO
gateway).
2. Enter the nickname. The Room Code field appears.
3. Enter the room code (if Room Code is active).
4. Click
Login
and go to Participants’ screen.
You can become now a moderator by selecting “Become Moderator” and
entering the password.
5. In this mode, the moderator must approve any participant who clicks on
“Present” to share content on the main screen. The moderator must click
Allow
to approve the request to start the participant’s presentation on the
collaboration display.
6. Once approved, the user gets the following message:
Summary of Contents for VIA GO
