![background image](http://html.mh-extra.com/html/kramer/via-go/via-go_user-manual_2000839010.webp)
4
VIA GO - Setting Up VIA GO
2
Setting Up VIA GO
Always switch off the power to each device before connecting it to your
VIA GO
. After connecting
VIA GO
, connect its power and then switch
on the power to each device.
To connect the
VIA GO
as illustrated in the example in
Figure 2
you need a:
•
VIA GO
Wireless Collaboration Hub.
•
Display (projector, monitor, or screen).
•
Local Area Network (LAN) cable for connection to your network. For
wireless network connectivity, use a commercial wireless router or the built-
in Wi-Fi.
The following client devices are applicable with Kramer's
VIA
collaboration hub:
•
A Windows 7/8/10® (32-bit/64-bit) computer.
•
A Macintosh® computer, using OSX 10.8.x or newer.
•
A Chromebook with the VIA Application installed.
•
An iPad/iPhone® tablet/smartphone with the VIA app installed (iPad 2 or
later, iOS 9 or later).
Note
: When using the Airplay service, no application is needed. However, we
recommend using iOS10 or Sierra OS X for a better experience.
•
An Android® OS 5.x tablet/smartphone with the VIA app installed.
Note
: For using the Android mirroring feature, a device equipped with Android 5.1
minimum is required.
•
A Windows
®
phone with the VIA app installed.
Summary of Contents for VIA GO
