![background image](http://html1.mh-extra.com/html/kramer/tp-900uhd/tp-900uhd_user-manual_2002184028.webp)
KRAMER PROTOCOL 3000
28
KRAMER ELECTRONICS, LTD.
Command chain separator character
When a message string contains more than one command, a pipe ( '|' ) character separates each
command.
Spaces between parameters or command terms are ignored.
You can directly enter all commands using a terminal with ASCII communications software, such as
HyperTerminal, Hercules, etc. Connect the terminal to the serial or Ethernet port on the Kramer device.
To enter
CR
press the Enter key.
(
LF
is also sent but is ignored by command parser).
For commands sent from some non-Kramer controllers like Crestron, some characters require special
coding (such as, /X##). Refer to the controller manual.
Entering Commands
Some commands have short name syntax in addition to long name syntax to allow faster typing. The
response is always in long syntax.
Command Forms
Multiple commands can be chained in the same string. Each command is delimited by a pipe character
(“|”). When chaining commands, enter the
message starting character
and the
message closing
character
only once, at the beginning of the string and at the end.
Commands in the string do not execute until the closing character is entered.
A separate response is sent for every command in the chain.
Chaining Commands
64 characters
Maximum String Length