OPERATING THE TP-900UHD
20
KRAMER ELECTRONICS, LTD.
Submenu
Parameter
Values
Notes
OUTPUT
CONFIGURATION
OUTPUT STANDARD
3840x2160p25
3840x2160p30
3840x2160p50
3840x2160p60
TEST SIGNAL
NO TEST SIGNAL - default
COLOR BARS100%
SPLIT BARS 100%
TILT LINE
CROSS HATCH
SPLIT CROSS HATCH
MODULATED RAMPS
MOVING TILT LINE
Select any TEST Signal for output
instead of HDMI or HDBT input.
OUTPUT HDMI - DVI
SELECT METHOD
AUTO 1 – HDMI priority
AUTO 2 – DVI priority
Forced HDMI always
Forced DVI always
If Sink EDID is not available, then
will be selected HDMI format when
AUTO 1, and DVI - when AUTO 2
OUTPUT HDCP MODE
FOLLOW INPUT – default
FOLLOW OUTPUT
ALWAYS ON
ALWAYS OFF
HDCP on the output depends on
HDCP on the input
HDCP on the output depends on
HDCP capability of the Sink
HDCP on the output is active always
HDCP on the output is not active.
If input signal contains HDCP then
output signal will be muted
IMAGE QUALITY
ADJUSTING
CONTRAST
50% to 150%
Default 100%
Set the contrast of the image
BRIGHTNESS
50% to 150%
Default 100%
Set the brightness of the image
COLOR
0% to 150%
Default 100%
Set the color of the image
SHARPNESS
0% to 110%
Default 0%
Set the sharpness (edge contrast)
UHD transition to HD
NO FILTER – Default
SOFT FILTER ENABLED
The setting is active only while down
conversion from UHD to HD. If ENA-
BLED then the image is smoothed at
the cost of sharpness
IMAGE GEOMETRY
ADJUSTING
HORIZONTAL SIZE
50% to 150%
Default 100%
Set Horizontal Image Size only if
input Aspect Ratio is near to 16:9
VERTICAL SIZE
50% to 150%
Default 100%
Set Vertical Image Size only if input
Aspect Ratio is near to 16:9
HORIZONTAL SIZE
50% to 150%
Default 100%
Set Horizontal Image Size only if
input Aspect Ratio is near to 4:3
VERTICAL SIZE
50% to 150%
Default 100%
Set Vertical Image Size only if input
Aspect Ratio is near to 4:3
HORIZONTAL IMAGE
POSITION
-10.0% to +10.0%
Default 0%
Set Horizontal Image Position
VERTICAL IMAGE
POSITION
-10.0% to +10.0%
Default 0%
Set Vertical Image Position
