![background image](http://html.mh-extra.com/html/kramer/rc-74dl/rc-74dl_user-manual_2000905012.webp)
10
RC-74DL - Connecting the RC-74DL
4.2
Connecting the Ethernet Port
The Ethernet connection of the
RC-74DL
lets you perform all control functions of
the
RC-74DL
over the Internet using a PC running the Kramer Site-CTRL control
program.
To connect the
RC-74DL
to a network:
1. Connect the Ethernet port of the
RC-74DL
to the Ethernet port on a network
hub or network router, via a straight cable with RJ-45 connectors.
2. At the other end, connect the Internet to a PC running
Site-CTRL
.
3. After connecting the Ethernet port, you have to install and configure it. For
detailed instructions on how to install and configure your Ethernet port, see
the
K-Config Software Guide
available from our Web site.
4.3
Grounding the RC-74DL
The grounding screw is used to earth the chassis of the unit to the building ground
preventing static electricity from impacting the performance of the unit.
Figure 5
shows the grounding screw components.
Figure 5: Grounding Connection
Components
#
Component Description
1
M3X6 screw
2
1/8" Toothed Lock Washer
3
M3 Ring Tongue Terminal