![Kramer RC-74DL User Manual Download Page 10](http://html.mh-extra.com/html/kramer/rc-74dl/rc-74dl_user-manual_2000905010.webp)
8
RC-74DL - Connecting the RC-74DL
4
Connecting the RC-74DL
Always switch off the power to each device before connecting it to your
RC-74DL
. After connecting your
RC-74DL
, connect its power and then
switch on the power to each device.
To connect the
RC-74DL
, as shown in
Figure 3
, do the following:
1. Connect the IR outputs as follows:
Connect an IR emitter to IR OUTPUT 1 and attach the emitter to the
DVD player
Connect an IR emitter to IR OUTPUT 2 and attach the emitter to the
power amplifier
2. Connect the RS-232 ports (see
Section
4.3
) as follows:
Connect RS-232 port 1 to the projector
Connect RS-232 port 3 to the plasma display
3. Connect the RELAY terminal block connectors as follows:
Connect RELAY 1 and 2 to the screen
Connect RELAY 3 and 4 to the lighting system
4. Connect the GPI/O 1 port to a motion detector.
5. Connect the Ethernet port to a network (not shown in
Figure 3
).
6. Connect the K-NET port to any
RC
device with K-NET (for example, the
RC-63DL
).
i