Kramer Electronics Ltd.
MV-4X
– Using Embedded Web Pages
46
Defining Interface Settings
Define the Ethernet port interface settings.
To define interface settings:
1. In the Navigation pane, Select
Device Settings
. The General tab in the Device Settings
2. Select the
Network
tab. The Network tab appears.
Figure 33: Device Settings
– Network Tab
3. Set the Media port Stream service parameters:
▪
DHCP mode
– Set DHCP to
Off
(default) or
On
.
▪
IP Address
– When DHCP mode is set to Off, the device uses a static IP address.
This requires entering mask and gateway addresses.
▪
Mask Address
– Enter subnet mask.
▪
Gateway address
– Enter the gateway address.
4. Define TCP (default, 5000) and UDP (default, 50000) ports.
Interface settings are defined.