Kramer Electronics Ltd.
MV-4X
– Using Embedded Web Pages
36
•
To configure a PoP mode window:
1. In the Navigation List, click
AV Settings
. The Matrix tab in the AV Settings page
2. From the top menu bar, select
Multi View
.
3. Select the PoP mode. The PoP mode view appears and the gray indication to the right of
the Multi View mode turns green.
Figure 20: Multi View Tab
– PoP Mode
4. For each window you can:
▪
Set Display slider to enable the display of the selected window.
▪
Select the video source.
▪
Set Priority (Layer) from the drop-down box (1 to 4, where 1 is the top layer).
▪
Next to Size, define the size of the window and then click
.
▪
Set the position of the window by entering its exact location (H and V), by aligning it
to a display side and clicking
, or by simply clicking and dragging a window.