Kramer Electronics Ltd.
MV-4X
– Using Embedded Web Pages
30
Adjusting Output Parameters
For each operation mode you can adjust the output settings. Not all parameters are available
for each operation mode.
To adjust output parameters:
1. Click
AV
on the Navigation List. The AV Settings page appears (see
).
2. Click
Outputs
tab.
Figure 14: AV Settings
– Outputs Tab
3. For each output:
▪
Change the label name.
▪
Set HDCP to Follow Input or Follow Output.
4. Select the audio source for each output:
▪
HDMI 1 to 4: use the audio from the selected input.
▪
WINDOW 1 to 4: use audio from the source that is currently displayed in the
specified window.
5. Mute/unmute each output.
6. Select the auto switching mode (Off-Manual, Auto Scan or Last Connected).
7. Select audio source from HDMI or DVI (analog audio source).
8. Select the output resolution from the drop-down list.