![background image](http://html1.mh-extra.com/html/kramer/mv-4x/mv-4x_user-manual_2001136055.webp)
Kramer Electronics Ltd.
MV-4X
– Using Embedded Web Pages
53
3. Define the OSD Logo parameters:
▪
Display
– Enable displaying the logo graphic or disable.
▪
Position X/Y
– Set the horizontal and vertical upper left corner position of the logo
(the value is relative to the output resolution).
▪
Update the Logo
– Click
BROWSE
to open and select the new logo file and click
Open
. Click
UPDATE
to upload the new logo from your PC. The logo file should be
8-bit *.bmp format, 960×540 max resolution.
The upload process can take a few minutes, depending on the logo file size.
The device automatically reboots when upload is complete.
▪
Click RESET to remove the current logo and upload the default test image.
This reset process can take a few minutes. The device automatically reboots
when reset is complete.
OSD logo is defined.
Defining Boot Logo Settings
The boot logo that appears on the display while the device is booting up can be uploaded by
the user instead of the default boot logo.
To define boot logo settings:
1. In the Navigation pane, click
OSD Settings
. The General tab in the OSD Settings page
appears.
2. Select the Logo tab. The Logo tab appears.
3. Define the Boot Logo parameters:
▪
Display
– Enable displaying the logo graphic or disable.
▪
Boot 4K Source
– When the output resolution is set to 4K or above, select
Default
to
display the default graphic image upon booting, or select
User
to upload a graphic.
▪
User 4K Update
– when User is selected, upload a 4K boot graphic, click
BROWSE
to open and select the new logo file and click
Open
. Click
UPDATE
to upload the
new logo from your PC. The logo file should be 8-bit *.BMP format, 3840×2160
resolution.
▪
Boot 1080P Source
– When the output resolution is set between 1080P and VGA,
select
Default
to display the default graphic image upon booting, or select
User
to
upload a graphic.
▪
User 1080P Update
– when User is selected, upload a 1080P boot graphic, click
BROWSE
to open and select the new logo file and click
Open
. Click
UPDATE
to
upload the new logo from your PC. The logo file should be 8-bit *.BMP format,
1920×1080 resolution.
▪
Boot VGA Source
– When the output resolution is set to VGA or less, select
Default
to display the default the default graphic image upon booting, or select
User
to
upload a graphic.