Kramer KDS-EN2R, User Manual

Page: 30 / 35

KDS-EN2T, KDS-EN2R - Configuring the System 27
Feature Function
Reset to Basic Setup Reset the selected device to the basic setup parameters
Screen Layout (Row x Column) Change the array layout
Row Position
Change the row position of the selected device
Column Position Change the column position of the selected device
Horizontal Shift Shift the horizontal position of the selected client device
(each step moves the image by 8 pixels)
Note that you cannot shift the image to the right on the displays
positioned at the left edge of the video wall, thus creating a black
stripe at the video wall left edge. The same applies to shifting the
image at the right edge of the video wall to the left.
Vertical Shift Shift the vertical position of the selected device (each step
moves the client image by 8 pixels and the host by 1 pixel)
Note that you cannot shift the image downwards on the displays
positioned at the top edge of the video wall, thus creating a black
stripe at the video wall top edge. The same applies to shifting the
image at the lower edge of the video wall upwards.
Horizontal Scale Up Scale up the selected client horizontally
Vertical Scale Up Scale up the selected client vertically
Tearing Delay Use under “single host mode” only to avoid tearing (in
micro seconds)
Typical value is 10,000 to 16,000
Console API Command: Enter advanced configuration commands
6.4 The Web Pages
The Web pages can be accessed via the IP HDMI utility for configuring the basic
setup and other functions or directly by entering the IP number or the device name
to the browser address to fine tune the basic setup or to upgrade the firmware.
The Web pages include two tabs, the System tab (see Section 6.4.1 ) and the
Video Wall Setup tab (see 6.4.2 Section
6.4.1 The System Tab
).
Includes the version information, firmware update and utilities.