Kramer KDS-EN2R, User Manual

Page: 13 / 35

10 KDS-EN2T, KDS-EN2R - Defining the KDS-EN2T and KDS-EN2R
4.3.4 Reset to Factory D FW Update
Press and hold (for 6 to 8 sec) the MODE button on the KDS-EN2T / KDS-EN2R to
reset to the factory default and upgrade the firmware.
You can upgrade the firmware via the Web Pages or the IP HDMI Utility program
(see
Section 6.4.1.2
Firmware update file name will be: Transmitter: webfwh.bin; Receiver: webfwc.bin
).
4.4 Setting the Multicast Group ID
When hosts and clients are assigned the same multicast group ID number, all the
clients in the group will decode the stream from the same host. You can set up to
16 groups either via the GROUP ID DIP-switches or the IP-HDMI Utility software
(see
Section 6.2 ). For example, to set the group ID to 1, you have to set DIP 1, 2
and 3 to OFF and DIP 4 to ON.
The application software group ID setup overrides the DIP-switch
group ID setup.
i