KDS-EN2T, KDS-EN2R - Defining the KDS-EN2T and KDS-EN2R
7
4.2
Your KDS-EN2R
Figure 2
defines the
KDS-EN2R
:
Figure 2: KDS-EN2R
#
Feature
Function
1
ON
LED
Lights green when the power is ON and the system is
active
Blinks when the power is ON and the system is booting
2
LINK
LED
Lights green when LAN is connected
3
DATA
LED
Lights green when system is active
Blinks when connecting to the transmitter or if the HDMI
source is disconnected
4
MODE
Button
Press the MODE button using a small screwdriver (see
Section 4.3
5
)
EDID
Button
Press the EDID button using a small screwdriver (see
Section 4.3
6
)
GROUP ID
DIP-switches
Set the group ID (see
Section 4.4
7
)
5V DC
+5V DC connector for powering the unit
8
LAN
RJ-45 Connector
Connects to the LAN RJ-45 connector on the
KDS-EN2T
directly or via an Ethernet switch
9
HDMI OUT
Connector
Connects to the HDMI acceptor
10
RS-232
9-pin D-sub Connector Connects to an RS-232 port
Summary of Contents for KDS-EN2R
Page 2: ......
Page 20: ...KDS EN2T KDS EN2R Connecting the KDS EN2T KDS EN2R 17 Figure 7 Video Wall Application...
Page 34: ......