Kramer KDS-EN2R, User Manual

Page: 19 / 35

16 KDS-EN2T, KDS-EN2R - Connecting the KDS-EN2T/KDS-EN2R
5. Connect the 9-pin D-sub Y-cable to the three KDS-EN2T units, as illustrated
in Figure 6 .
Figure 6: Connecting the RS-232 Y-cable
6. Set the group ID via the DIP-switches. For example, set the group ID of the:

KDS-EN2T
transmitting to the first row and the receivers positioned in
the first row to 1

KDS-EN2T transmitting to the second row and the receivers positioned
in the second row to 2

KDS-EN2T transmitting to the third row and the receivers positioned in
the third row to 3
7. If required, on each unit connect the 5V DC power adapter to the power
socket and connect the adapter to the mains electricity (not shown in Figure
7 )
8. Set the wall application for each unit via the IP HDMI Utility software and/or
Web pages (see Section 6
9. Reboot all devices. Ensure that all remote displays and all network cables
are connected correctly (a video source is required at this step).
).