22
KDS-EN2T, KDS-EN2R - Configuring the System
In the example in
Figure 11
, one device is identified as the
KDS-EN2R
receiver (the client) and the other device is the host. The devices can
be identified via their OSD which displays the IP number. This is very
useful in a setup that includes multiple devices.
4. If required, in the main window set the RS-232 baud rate and click Apply.
The default baud rate is set to 9600-8-N-1
5. If required (see
Section 5.2
), in the main window, set the group ID number
and click Apply:
Figure 12: Apply RS-232 and Group ID settings
The following window appears:
Figure 13: System Rebooting
If you are setting up a multicasting system or a single one-to-one system the
configuration is complete.
To configure a TV Wall, continue to
Section 6.3
i
.
Summary of Contents for KDS-EN2R
Page 2: ......
Page 20: ...KDS EN2T KDS EN2R Connecting the KDS EN2T KDS EN2R 17 Figure 7 Video Wall Application...
Page 34: ......
