FC-340S – Contents
i
Contents
1
Introduction
1
2
Getting Started
2
2.1
Achieving the Best Performance
2
3
Overview
3
4
Defining the FC-340S SDI Scaler/Embedder/Scan Converter
4
5
Connecting the FC-340S
6
5.1
Connecting a Serial Controller to the FC-340S
7
5.2
Connecting to the FC-340S via Ethernet
7
5.3
Connecting the Balanced/Unbalanced Stereo Audio Output
10
6
Operating the FC-340S
11
6.1
Changing the Output Resolution
11
6.2
Using the Menu
12
6.3
To Reset the Device to Factory Default Configuration
14
6.4
Locking and Unlocking the Front Panel
14
6.5
Updating the Firmware Using the K-Upload Software
15
7
Technical Specifications
16
8
Default Parameters
17
8.1
Default Communication Parameters
17
9
Kramer Protocol
18
9.1
Protocol 3000 Syntax
18
9.2
Command Part Details
19
9.3
Kramer Protocol 3000 Commands
20
Figures
Figure 1: FC-340S SDI Scaler/Embedder/Scan Converter Front Panel
4
Figure 2: FC-340S SDI Scaler/Embedder/Scan Converter Rear Panel
5
Figure 3: Connecting the FC-340S SDI Scaler/Embedder/Scan Converter
6
Figure 4: Local Area Connection Properties Window
8
Figure 5: Internet Protocol (TCP/IP) Properties Window
9
Figure 6: Balanced Stereo Audio Connection
10
Figure 7: Unbalanced Stereo Audio Connection
10