14
FC-340S - Operating the FC-340S
6.2.5
System Sub-menu
The parameters in the System sub-menu display the device versions and set the
LCD display characteristics.
Parameter
Description
FIRMWARE
The device firmware version
FPGA VER
The device FPGA version
S/N
The device serial number
6.3
To Reset the Device to Factory Default Configuration
To reset the device to the factory default configuration
:
1. Turn the device off.
2. Press and hold the Reset button on the rear panel of the device.
3. While holding the button depressed, turn the device on.
4. Hold the button depressed for 10 seconds and release the button.
The configuration is reset to the factory default.
6.4
Locking and Unlocking the Front Panel
You can lock the front panel buttons to prevent unwanted key presses from
changing the current configuration.
To lock the front panel
:
•
Press and hold the Panel Lock button.
The button lights, the Locked message is displayed briefly, and the front
panel buttons are locked. Pressing any button causes the Locked message
to display briefly and the Panel Lock button to flash
To unlock the front panel
:
•
Press and hold the Panel Lock button.
The button no longer lights and the front panel buttons are unlocked
