Kowa D5300, Service Manual, Page: 28 / 44

nonmyd 8 GG-15010 Edition 1.1
27
7-4
Cleaning the objective lens
１
Turn on a power supply switch.
２
Make the room dark so that dirt of an object lens is known well.
３
Hold down the center button more than 2 seconds to access the menu mode.
４
Push a
◀
button while selecting "LENS CLEANING" by the menu mode.
The lamp for the object lens cleaning lights.
５
Blow away the dust and garbage of a objective lens by Blower.
６
When not becoming beautiful by Blower, use clean gauze or a cleaning paper including some
anhydrous ethyl alcohol and Mixed- solution of ether. Please wipe lightly to draw a circle little by little
outside from a center with clean gauze or cleaning paper containing the mixed-solution.
７
If cleaning is finished, terminate a menu. (The lamp for the object lens cleaning is turned off.)
A point after having finished wiping it
※
Throw away the cleaning paper (gauze) used once. By wiping with the mixed-solution using a new
cleaning paper (gauze) again, it can wipe more finely.
※
If it wipes while garbage had been attached, or it wipes strongly, a crack may go into an object lens.
※
Please do not use the chamois leather and silicone crossing.
※
Please warn safekeeping, the handling enough mixture liquid evaporates and because it is easy to
catch fire.
※
When there is the dirt which I do not get with mixture liquid, it may be able to take, if a swab is
absorbed with little water and it wipes lightly. After this work
、
please wipe a lens with The
above-mentioned mixed-solution finely.
Please contact our company or an agency of a buying request when there is the terrible dirt which you
do not get even if you wipe it.
3 4
5 6