Kowa D5300, Service Manual, Page: 14 / 44

nonmyd 8 GG-15010 Edition 1.1
13
●
Optical head base cover and panel cover
〔
Tools
〕
・
Nipper
・
Hex-wrench(2.5)
〔
Procedure
〕
1
Remove five screws with hex-wrench(2.5).
Remove one of the optical head base covers.
And then remove another optical head base cover.
2
Disconnect the cable connector from main board, sub board(three places).
Cut a band,which holds the
cables,by using nipper.
(main board side)
<Caution for restoring>
Never
hold the yellow/green
ground wire.
There may be a risk of wire
disconnection when some load is
applied to the ground wire
terminal.
Cut a band, which holds the
cables,by using nipper.
Disconnect two cable
connectors.
(main board)