Kortho GraphicJet X Series, Manual

Page: 102 / 178

DIAGNOSTICS / TROUBLESHOOTING
kortho
KGJ X18 H550 AE
Rev.: 001
9-8
Model – model of the codingunit connected to the control unit.
Date – system date of the control unit.
Printer ID – the printer ID as defined by the user.
Speed – the speed at which the system will make a print (without encoder).
IP Address/Subnet/Gateway – the set network addresses of the control unit.
Touch the Ok button to return to the Diagnostics-Printer menu.
Error
Touch the Error button to show the 12 most recent errors/warnings since the printer was switched on.
Beware:
When the control unit is rebooted or switched off the error list will be cleared.
Note:
To view errors 4 to 10 touch the screen and drag the messages upwards. This will scroll them into
view.
Note:
If an particular error occurs more than once, sequentially, the error will only last time the error
occurred will be mentioned in the error list.
A B
Fig. 9.15 Error-Warning list
Touch the Ok button to return to the Diagnostics-Printer menu.
Calibration
In this menu the printhead voltage calibration values can be set.
Beware:
The system could get disrupted once the calibration values are not properly set. The calibration
procedure should only be preformed by qualified personnel of Korthofah BV or a local distributor,
which is designated by Korthofah BV.
Cancel
Touch the Cancel button to return to the Diagnostics main menu.
i
i