TRANSPORT & STORAGE
kortho
KGJ X18
H550 AE
Rev.: 001
5-6
1.
Take the ink out of the ink reservoir. Extract the ink up from the ink reservoir with a clean syringe
or prime all the ink through the printhead in a clean ink bottle (for later refill). Refer to subsection
8.5.2.
2.
Keep the coding unit upright to avoid ink leakage of residue fluid from the ink reservoir through
the air release channel.
3.
Use original or equal packaging for the printer equipment.
4.
Label the box with ‘keep dry’ labels like label (B) of Fig. 5.1 (visible at all sides).
5.
Label the box with ‘fragile’ labels like label (C) of Fig. 5.1 (visible at all sides).
6.
Mark the top of the box with ‘this side up’ labels like label (D) of Fig. 5.1 (visible at all sides).
For long distance or at least two day travel:
1.
Take the ink out of the ink reservoir. Extract the ink up from the ink reservoir with a clean syringe
or prime all the ink through the printhead in a clean ink bottle (for later refill). Refer to subsection
8.5.2.
2.
Refill the ink reservoir with 50ml solvent.
3.
Carry out the nozzle maintenance procedure. Refer to subsection 10.2.
4.
Prime the ink system with the solvent through the printhead in a waste container.
5.
Repeat from instruction 2 until all the printhead nozzles spout a clean jet.
6.
Extract or prime the remaining solvent from the ink reservoir (same as instruction 1 but read solvent
instead of ink).
7.
Verify whether the ink reservoir is empty.
8.
Keep the coding unit upright to avoid leakage of residue fluid from the ink reservoir through the air
release channel.
9.
Use original or equal packaging for the printer equipment.
10.
Label the box with ‘keep dry’ labels like label (B) of Fig. 5.1 (visible at all sides).
11.
Label the box with ‘fragile’ labels like label (C) of Fig. 5.1 (visible at all sides).
12.
Mark the top of the box with ‘this side up’ labels like label (D) of Fig. 5.1 (visible at all sides).
5.1.3 Pre-storage procedure
The printer storage location and time is determinative for the pre-storage procedure:
When still mounted on the support but idle for at least one month:
1.
Take the ink out of the ink reservoir. Extract the ink up from the ink reservoir with a clean syringe
or prime all the ink through the printhead in a clean ink bottle (for later refill). Refer to subsection
8.5.2.
2.
Refill the ink reservoir with 50ml solvent.
3.
Carry out the nozzle maintenance procedure. Refer to chapter 10.2.
4.
Prime the ink system with the solvent through the printhead in a waste container.
5.
Repeat from instruction 2 until all the printhead nozzles spout a clean jet.
6.
Extract or prime the remaining solvent from the ink reservoir (same as instruction 1 but read solvent
instead of ink).
7.
Verify whether the ink reservoir is empty.
8.
Place a dust cover or bag over the coding unit.
For storage prior to distribution:
Summary of Contents for GraphicJet X Series
