COMMISSION
kortho
KGJ X18
H550 AE
Rev.: 001
7-10
Spit Enable
To set the spitfunction the function needs to be enabled. To set the Spit interval:
1.
Touch the
Settings
icon.
2.
Touch the
button.
3.
Set
Spit enbale
to Enabled
Spit delay
Set the Spit delay, to prevent pixel-columns being spit on the product. This spit delay represents the time in
seconds that the system will wait after a label has been printed, before starting to spit.
The spit delay can be set to a value between 0 and 20.000 milli seconds. When zero is selected, the first pixel-
column will be spit directly after the printed label. Determine how long it will take the product to pass the
printhead after it has printed the label. Select this value in the menu below and see whether this value is
correct. If it does not matter that the pixel-column is spitted on the product, just leave the value at zero. To
set the spit delay:
1.
Touch the
Settings
icon.
2.
Touch the
menu.
3.
Set
Spit delay(ms)
to the required value
Spit interval
When the value is set the printhead will ‘spit’ a pixel-column of 128 dots of ink every ‘x’ (x= set value)
seconds. The range off the spit interval can be set between2.000 and 20.000 milli seconds. The set interval
time depends on the type of ink used and ambient circumstances, like temperature and humidity. Try
several settings to minimise ink usage and pollution. To set the Spit interval:
1.
Touch the
Settings
icon.
2.
Touch the
button.
3.
Set
Spit interval(ms)
to the required value
The first pixel-column will be spitted directly after the print cycle has finished. To avoid these pixel-columns
being printed on the product, use the option Spit delay to set a time, which the printer will take into account
before the pixel-column will be spit.
Spit lines
The amount of lines that will be spitted every set interval can be set between 1 and 5. To set the amount of
lines:
1.
Touch the
Settings
icon.
2.
Touch the
menu.
3.
Set
Spit lines
to the required value
7.5.2
Setting the ink low and ink out outputs
The Low ink prints settings tells the printer what to do when the ink level in the ink reservoir is low. At ink
low condition, the printer will generate a warning on screen, will activate the ink low output and will
continue to print for the amount of prints set. After the set amount of prints is reached the printer stops
printing and the Low ink output will be set.
Summary of Contents for GraphicJet X Series
