Kortel Design KLIFF II, User Manual

Page: 38 / 86

More detailed information is available at www.korteldesign.com. More detailed information is available at www.korteldesign.com.
Connectors:
The harness is equipped with connectors integrated into the
anchorage points. To handle them, simply proceed as
described below (Steps 1 to 4).
It is also possible to use independent connectors, and connect
them to properly closed anchor points.
After each manipulation of a carabiner, it is imperative to check
After each manipulation of a carabiner, it is imperative to check
that it is properly locked. If in doubt, repeat the operation.
that it is properly locked. If in doubt, repeat the operation.
We recommend the use of connectors with a resistance greater
We recommend the use of connectors with a resistance greater
than or equal to 2400daN.
than or equal to 2400daN.
Flexible connectors should not be used on straps wider than
Flexible connectors should not be used on straps wider than
25mm.
25mm.
According to the current state of knowledge on automatic Zicral According to the current state of knowledge on automatic Zicral
carabiners, it is recommended to change them every 5 years or after 500 carabiners, it is recommended to change them every 5 years or after 500
hours of use. hours of use.
Step 1 Step 2
Step 3
Step 4
38
KLIFF II
Preparing your harness
First settings