Kortel Design KLIFF II, User Manual

Page: 44 / 86

Once the pre-flight is complete and checked-out, it is time to
settle in correctly in the harness:
- Slip in the harness
- Position the shoulder staps to hold the harness in place
Despite the possibility to open them, we recommend leaving
the buckles closed when donning the harness, for greater
safety and to minimize the risk of forgetting the attachment.
It is possible to open the leg loops to put on the harness, by
proceeding as follows:
- Thread the dyneema loop in the ring of the "Konnect"
system
- Pass the loop around the red pin
- Tighten the loop
Just as much as the harness settings, the pilot's take-off gestures
Just as much as the harness settings, the pilot's take-off gestures
are crucial for ease of installation.
are crucial for ease of installation.
More detailed information is available at www.korteldesign.com.
More detailed information is available at www.korteldesign.com.
1
2
44
3
KLIFF II
Connection in the harness
Preparation for take-off