Korg Digital Mixer ZERO8, Service Manual

Page: 20 / 42

Fig １２ Encoder 1 start
8. 1-8 Rotary Encoder Check
Set the pointer of the Encoder 1 knob to the reference position of bottom,
push the Encoder knob and reset the count to "0"(Fig.12)
2. Rotate the Encoder 1 to the right for one around and confirm that the display is "30"
and the characters of the display are reversed.
3.Press the [MASTER].
Fig １３ Encoder 1 right
4. Rotate the Encoder 1 to the left for one around and confirm that the display is "-30"
and the characters of the display are reversed.
5.Press the [MASTER] to proceed to the next encoder..
6. Same as above do the check of Encoder 2-8.(Fig.15)
7. After Encoder8 proceed to the next.
Fig １４ Encoder 1 left
Fig １５ Do until Encoder8
KORG INC.
4／14 2007.4.25
QCI-5810 Page
ZERO8 (X-5810) Check before Shipping
Revised
No.
Date