Korg Digital Mixer ZERO8, Service Manual

Page: 18 / 42

5. SW & LED Check
All LED light 1
Fig ４
5-1. All LED light and individually light
Fig.4 is displayed.
Confirm that each LED light by the color of "all LED light 1" in the Table1.
Press the [MASTER].
Fig.5 is displayed.
Confirm that each LED light by the color of "all LED light 2" in the Table1.
All LED light 2
Fig ５
Table1 LED light Check
LEDs which are checked. All LEDs light 1 All LEDs light 2
1-8CH GAIN Orange Red
1-8CH INPUT SELECTOR - EQ SELECTOR-HI-FREQ-MID-LO each volume
Orange
Blue
1-8CH PAN-EXT1-EXT2-ZERO FX SEND each volume Orange Blue
1-8CH [CUE][A][B] each switch Orange Blue
1-8CH FADER meter LED
0-8：Blue,9：Orange10：Red 0-8：Blue,9：Orange10：Red
Meter Back light L＆R White White
Meter Peak LED L＆R Red Red
FIREWIRE LED Yellow Yellow
EXT1 [CUE] EXT2 [CUE] ZERO FX [CUE] each switch Orange Orange
EXT1-EXT2-ZERO FX each volume
Orange Orange
BOOTH-MASTER-(MONITOR section)BAL-LEVEL each volume Orange Orange
[SET UP]-[BPM]-[AUTO]-[TAP] each switch Blue Blue
(CONTROLLER BANK section)[A]-[B]-[C]-[D] each switch Blue Blue
1-8 each ROTARY ENCODER Blue Blue
[HOLD]-(ZERO FX section) CHANNEL]-[SEND]-[MASTER] each switch Orange Orange
After the confirmation, Individually light
press the [MASTER]
Ｆｉｇ ６
Fig.6 is displayed.
By each group "all LED light 1" and "all LED light 2" mutually light.
・Ch1 GAIN
・CH1 INPUT SELECTOR, EQ SELECTOR, HI、FREQ, MID, LO each volume
・CH1 PAN, EXT1, EXT2, ZERO FX SEND each volume
Same as above proceed the check , CH2, CH3,,,until CH8 by pressing the [MASTER].
After confirmed CH8 PAN, EXT1, EXT2, ZERO FX SEND each volume, press the [MASTER]
the meter LED beside the CH FADER begins to light.
Confirm that the meter LED lit from 0 to 10, and turned off from 10 to 0.
Press the [MASTER].
The meter LED of CH2 begins to light.
Same as above, confirm CH3,,,CH8.
Press the [MASTER] to proceed to the next.
KORG INC.
2／14 2007.4.25
QCI-5810 Page
ZERO8 (X-5810) Check before Shipping
Revised
No.
Date