Korg Digital Mixer ZERO8, Service Manual

Page: 26 / 42

・Confirmation of MIC INPUT1,2 (MIC GAIN HIGH/LOW)
*This check uses D3200,
instead of a microphone
Connect the ZERO8 and the D3200 like following.
If you have a microphone, please use it.
ZERO8 MIC 1(TRS) terminal - D3200 MASTER L
Confirm that the MIC GAIN switch (under the MIC1 TRS) of ZERO8 is "HIGH".
Set the CH1-8 INPUT SELECTORs to "MIC 1".
Set the CH1-8 GAIN to the center.
Set the MASTER FADER of D3200 to "40".
Press the PLAY switch of D3200. (Demo song starts.)
Set the CH1 module FADER to "10".
You can hear the demo song of the D3200 through the headphones,
confirm that there is not noise and fragmentary sound.
Press the MIC GAIN (under the MIC1 TRS) and set it to "LOW".
Confirm that the sound of the headphones becomes smaller.
Set the CH1 module FADER to "0".
Press the MIC GAIN (under the MIC1 TRS) of ZERO8 and set it to "HIGH".
Set the CH2 module FADER to "10".
Confirm that there is not noise and fragmentary sound from the headphones.
Press the MIC GAIN (under the MIC1 TRS) and set it to "LOW".
Confirm that the sound of the headphones becomes smaller.
Set the CH2 module FADER to "0".
Press the MIC GAIN (under the MIC1 TRS) of ZERO8 and set it to "HIGH".
Same way confirm until CH8.
After confirmed CH8,
press the STOP switch of the D3200. Then the demo song stops.
Pressing the STOP of the D3200, press the REW. (the song returns to the top.)
Set the CH1-8 GAIN to "-"(left end).
Connect the ZERO8 and the D3200 like following.
ZERO8 MIC２(TRS) terminal －D3200 MASTER L
Continued to the next
KORG INC.
10／14 2007.4.25
QCI-5810 Page
ZERO8 (X-5810) Check before Shipping
Revised
No.
Date