Korg Ci-8600, Owner'S Manual, Page: 72 / 112

72
5
Start recording
Press the SONG CONTROL [PLAY/STOP] switch, and the switch indicator will
light.
After a two-measure count-off, recording will begin.
To stop recording
Press the SONG CONTROL [PLAY/STOP] switch. The switch indicator will turn
off. The “Track” button that was recorded will change to “Play.”
6
Record additional tracks
Select another track as described in step 3, and record using the same procedure.
To record additional material on the same track
Press the record type cell, and select “OVDB.”
The following record types can be selected.
In the “Rec 1/3” page, “OVWR” will be used regardless of this setting.
For “OVWR” and “OVDB,” the “start measure” cell and the “end measure” cell set-
tings are ignored.
7
Modify the filename
Press the [EXIT] switch, and the “Save Recording” page will appear.
Press the “Rename” button and modify the filename. After modifying the filename,
press the “Return” button and you will return to the “Save Recording” page.
(
☞ p.35)
8
Save the data
To save the data to floppy disk, press the “Yes” button. If you decide not to save the
data, press the “No” button.
To return to the recording screen, press the “Cancel” button.
The file you save here is not in SMF format. If you want to save the data in SMF for-
mat, refer to p.75.
Recording from the middle of the song
1
Load the previously-saved song data
From the floppy disk, load the song data file that was saved in “Basic recording” or
Step Recording. (
☞ p.67)
2
Play back the recorded song
Set each track to “Play,” and press the [PLAY/STOP] switch.
3
When you come to the measure that you wish to record, pause
the playback
When playback reaches the measure at which you wish to begin recording, press
the [PAUSE] switch to pause.
4
Select the track that you wish to record
Change the setting to “Rec” for the track that you wish to additionally record.
•When recording with the [ACC] switch on, the KBD, CTRL, and CHORD tracks.
OVWR (overwrite): The newly-recorded data will overwrite (and erase)
the previously-recorded data.
OVDB (overdub): The newly recorded data will be added to the previ-
ously-recorded data.
AUTP (auto punch-in/out): Auto punch-in/out recording will be performed.
( ☞ p.73)
MeMO
MeMO