Korg Ci-8600, Owner'S Manual, Page: 85 / 112

85
Functions
To save All Setup data
Here’s how to save All Setup data from internal
memory to a floppy disk.
1. Press the [FUNCTION] switch
2. Insert a floppy disk
3. Access the “Func 6/13” page
4. Select the “All Set Up” radio button
5. Press the “Save” button
If you wish to change the filename
If you wish to change the filename, press the
“Rename” button and modify it. (
☞ p.35)
6. Press the “Save” button, and the data will be
saved to floppy disk
If you press the “Cancel” button, you will
return to the “Func 6/13” page without saving.
To recall All Setup
Here’s how to load All Setup data from floppy disk
into internal memory.
1. Press the [FUNCTION] switch
2. Insert the floppy disk
3. Access the “Func 6/13” page
4. Select the “All Set Up” radio button
5. Press the “Load” button
6. Select the file
7. Press the “Load” button
When you press the “Load” button, the data
will be loaded from floppy disk into internal
memory.
If you press the “Cancel” button, you will
return to the “Func 6/13” page without load-
ing.
If you load this data, the entire All Setup contents
in internal memory will be overwritten and lost.
If you wish to keep the existing data, save it on a
floppy disk before loading the new All Setup
data.
5. Floppy disk
Before a new floppy disk can be used on the Ci-
9600/Ci-8600, it must be formatted. You can also
format a floppy disk when you wish to erase all the
data from that disk to make it blank.
Be sure that the disk to be formatted does not con-
tain any data you wish to keep. The entire con-
tents of a formatted disk will be erased. Do not
format floppy disks that contain important data,
such as the included floppy disk.
Formatting a disk
1. Press the [FUNCTION] switch
2. Access the “Func 4/13” page
3. Insert the floppy disk
Insert the floppy disk that you wish to format
into the floppy disk drive.
When you format a floppy disk, any data that
had been stored on it will be erased.
Data that has been erased in this way cannot be
recovered.
Do not format the included floppy disk.
4. Press the “Start” button
When you press the “Start” button, a confirma-
tion screen will appear.
Press the “OK” button, and formatting will
begin.
If you press the “Cancel” button, formatting
will not occur, and you will return to the “Func
4/13” page.
Never turn off the power or attempt to
remove the floppy disk while formatting is
in progress. Doing so will cause malfunc-
tions.