Korg Ci-8600, Owner'S Manual, Page: 78 / 112

78
Event editing procedure when the Tempo track is selected
The procedure is the same as for the KBD track.
Only tempo events will be displayed.
<Basic operation>
• Moving between measures
Press the measure cell, and use the dial or the [VALUE] switches to specify the mea-
sure.
At this time, you will move in steps of the bar lines (…Bar…) at the beginning of
each measure.
• Selecting the type of event to edit
Use the “ ▼ ” and “ ▲ ” buttons.
• Inserting an event
When you press the “Insert” button, a new event will be inserted above the cur-
rently selected event.
The type and location of the event can be changed after it has been inserted.
• Editing an event
In the center line, press a cell other than the measure, and use the dial or the
[VALUE] switches to edit the event. When you have finished editing, press the
“Set” button.
If you have changed the location, the event will move to the specified location when
you press the “Set” button.
• Deleting an event
Move to the event that you wish to delete, and press the “Delete” button.
It is not possible to delete a bar line.
To delete a measure, use the “Delete Measure” command on page **.
• Completing event editing
When you have finished editing, press the [EXIT] switch to return to the “Rec 3/3”
page.
“Song Name” page
Here you can edit the song name.
Characters: Use the dial or the [VALUE] switches to select.
“
o
” button: Move the cursor to the left.
“
k
” button: Move the cursor to the right.
“Set” button: Finalize the selected character.
“Delete” button: Delete the character at the cursor location.
“Insert” button:
Insert a character at the cursor location.
“Return” button: After editing the name, press the “Return” button to return to
the previous screen.
MeMO
MeMO