77
Recording
“Event Edit” page
Here you can directly rewrite or add to the data.
Select the track and measure that you wish to edit, and press the “Start” button.
Event editing procedure when the Kbd track or Track 1–Track 5 is selected
When you press the “Start” button, the “Event Filter” page will appear.
Turn on the check boxes for the events that you wish to edit. When you press the
“OK” button, the Event Edit page will appear.
The data in the center of the screen is what you will be editing.
From the left, the display shows the measure, location, event, and event data.
Depending on the type of event, there may be either one or two event data values.
Event editing procedure when the Ctrl track is selected
The procedure is the same as for the KBD track, but the Event Filter page will not
appear.
Also, the events that are displayed will be different.
p.70 “Control event type list”
Event editing procedure when the Chord track is selected
The procedure is the same as for the Ctrl track.
If two or more chord events are input at the same location, only one will be valid.
In the case of chord events, the same chord will be used following that event.
If the type is set to “No Chord,” only Drum and Perc will play following that event.
To input the base (denominator) of an “on” chord (a chord such as is produced when
the [BASS INVERSION] switch is used), press the “/Bass” button to highlight it. If
you are not using an “on” chord, input the same chord for the denominator and
numerator.
“Track” cell:
Select the track that you wish to edit. The event editing pro-
cedure will differ depending on the track you select.
“Start Measure” cell: Select the measure at which you wish to start editing.
“Start” button:
Begin event editing.
“Cancel” button:
Return to the previous screen.
MeMO
Summary of Contents for Ci-8600
Page 1: ...2 E Owner s Manual...