Korg Ci-8600, Owner'S Manual, Page: 73 / 112

73
Recording
•When recording with the [ACC] switch off, the KBD and CTRL tracks.
•When recording tracks 1 through 5, the corresponding track.
5
Defeat pause
Press the [PAUSE] switch to defeat pause.
After a two-measure pre-count, recording will begin.
Auto punch-in/out
If you made a mistake or did not obtain the desired result in one location of a recorded
song, you can re-record just that location without having to re-record from the begin-
ning of the song. Auto Punch In is the action of automatically switching from playback
into record mode at the previously specified measure. Conversely, Auto Punch Out is
the action of automatically switching from record mode into playback at the specified
measure.
This function can be used on tracks 1–5.
1
Load the previously-saved song data
From floppy disk, load the song data file that you previously saved in “Basic
recording” or Step Recording. (
☞ p.67)
2
Pause at a point earlier than the measures you wish to re-record
Set each track to “Play,” and press the [PLAY/STOP] switch. Two or three measures
before the measure at which you will begin re-recording, press the [PAUSE] switch.
3
Select the track that you wish to re-record
For the track that you wish to re-record, press the “Track” button to select “Rec”.
The following settings cannot be made unless you select “Rec.”
4
In the “Rec 2/3” page, set the “recording mode” cell to “AUTP.”
Press the “Record type” cell, and use the dial or the [VALUE] switches to select
“AUTP.”
5
Set the “start measure” cell
Press the “start measure” cell, and use the dial or the [VALUE] switches to specify
the measure at which you will begin re-recording.
6
Set the “end measure” cell
Press the “end measure” cell, and use the dial or the [VALUE] switches to specify
the last measure that you will re-record.
7
Start recording
When you press the SONG CONTROL [PLAY/STOP] key, the song will play back
from the measure you specified in step 2.
Recording will begin automatically when you reach the measure specified in step 5, so
start playing a few measures earlier than the recording start measure.
8
Stop recording
When the recording end measure has passed, recording will stop automatically, and
playback will resume. Press the SONG CONTROL [PLAY/STOP] key to stop play-
back.
MeMO
MeMO
“Recording mode” cell
“End measure” cell
“Start measure” cell
MeMO