53
You may create and activate a rule that filters a packet based on the destination IP address to
restrict the local computers from accessing certain websites. Check “
Enable Destination IP
Filtering
” to activate rule.
Destination IP Address
: Enter the IP address to be restricted.
Comment
: Make comments to record your filtering rule.
Click
Apply
and the IP address will be added in the list. To delete the IP address from filtering,
click
Select
checkbox of the designated destination IP address and click the
Delete Selected
button. You may delete all the IP addresses in the list by clicking
Delete All
.
Source Port Filtering:
You may create and activate a rule that filters a packet based on the source port from your local
network to Internet. Check “
Enable Source Port Filtering
” to activate rule.
Port Range
: Enter the port range you would like to restrict.
Protocol
: Select port protocol:
Both
,
TCP
,
UDP
.
Comment
: Make comments to record your filtering rule.
Click
Apply
and the IP address will be added in the list. To delete the restricted source ports,
click
Select
checkbox of the designated ports and click the
Delete Selected
button. You may
delete all the IP addresses in the list by clicking
Delete All
