47
System
Basic System Settings
Device Settings
Device Mode
: Three modes are provided:
AC+Thin AP
,
Thin AP
,
FAT AP
. Select AC+Thin AP
to have the device act as virtual access controller to manage other Managed APs on your network.
Select “Thin AP” to have the JetWave 2450v2 managed by the ZAC AP in AC mode. Select FAT
AP to perform as a standalone AP, neither managing nor managed by other ZAC APs.
Device Name
: Specify the device name, which is composed of no more than 15 characters with
(0-9), (A-Z), (a-z) or (-).
Network Mode
: Specify the network mode, including Bridge and Router. It is easy to configure
parameters in Bridge Mode; however, users must pay extra attention to the way they configure the
device when it is set to Router Mode. For details, please refer to
TCP/IP Settings”
.
Ethernet Data Rate
: Specify the transmission rate of data for Ethernet. Default is
Auto
.
Country Region
: The availability of some specific channels and/or operational frequency bands
is country dependent.
Spanning Tree
: Spanning Tree Protocol (STP) is a link management protocol for AP which
provides path redundancy while preventing loops in a network. STP allows only one active path
at a time between the access points but establish the redundant link as a backup if the initial link
fails.
