50
another wireless device before it is set to Router mode. To access the unit in Router
mode via wired port, please type the WAN IP address to enter the web page for WAN
is on wired port and LAN is on wireless port. Or, you can access device through the
wireless device connected with the ZAC AP.
In wireless client mode, users can access the JetWave 2450v2 via its wired port, for
WAN is on wireless port and LAN is on wired port when device is set to Router mode.
Bridge mode and AP Repeater mode are similar to AP mode when device is set to
Router mode; WAN is on wired port and LAN is on wireless port. Thus users must also
connect the JetWave 2450v2 with another wireless device before it is set to Router
mode and access the JetWave 2450v2 via the connected wireless device.
Time Settings
Compliant with NTP, the IEEE 802.11n JetWave 2450v2 is capable of keeping its time in accord with
the Internet time. To use this feature, check
Enable NTP Client Update
in advance.
Current Time
Display the present time in Yr, Mon, Day, Hr, Min and Sec.
Time Zone Select
Select the time zone from the dropdown list.
NTP Server
Select the time server from the “
NTP Serve
r” dropdown list. or manually input the IP address of
available time server into “
Manual IP
”.
