49
valid DHCP server, it will fall back to default static IP address.
Use Fixed IP Address
: Check this option. You have to specify a static IP address, subnet mask,
default gateway and DNS server for the JETWAVE 2450V2 manually. Make sure the specified IP
address is unique on your network in order to prevent IP conflict.
If the IEEE 802.11n JetWave 2450v2 is configured as Router mode, you need to configure some
additional TCP/IP parameters for accessing the Internet.
WAN Settings
: Specify the Internet access method to Static IP, DHCP or PPPOE. Users must
enter WAN IP Address, Subnet Mask, Gateway settings provided by your ISPs.
LAN Settings
: When DHCP Server is disabled, users can specify IP address and subnet mask
for the JETWAVE 2450V2 manually. Make sure the specified IP address is unique on your
network in order to prevent IP conflict. When DHCP Server is enabled, users may specify DHCP
IP Address Range, DHCP Subnet Mask, DHCP Gateway and Lease Time (15-44640 minutes).
A DHCP relay agents is used to forward DHCP requests and replies between clients and servers
when they are not on the same physical subnet. To enable the DHCP relay agent, check the
“
Enable DHCP Relay
” checkbox and enter the IP address of the DHCP server.
In AP mode, the IEEE 802.11n JetWave 2450v2 must establish connection with
Warning:
