12
Typical Management Scenario
This section describes the typical management of JetWave 2450v2. By default, it is set to thin AP
mode (managed AP) which allows it to be managed by the JetWave 2450v2 in AC mode.
When a thin AP mode joins a wired network, it will start to look for a JetWave 2450v2 in AC mode. If
the thin AP founds the AP controller on the network, it will send the registration request to the AP
controller. Once the registration is successfully made, the AP that acts as the AP controller will add
the thin AP to its management list and provides it configuration information.
