24
For Virtual Cont Thin AP mode, if you need to configure the wireless settings for the JetWave
2450v2 especially SSID and encryption method, go to
Wireless Settings
> Wireless Networks
and
click on #1
Wireless
SSID for configuration. After the configuration is made, click
Save
to save the
settings.
A dialog message will pop up to remind you changes will also apply to other managed Thin APs.
Click
Apply
to apply the configuration immediately.
To make profile setting on the JetWave 2450v2 itself take effect, you need to reboot the AP in
controller mode as well. To reboot the JetWave 2450v2, go to
Management
> Configuration File
