78
JetPort 5208/5216 User’s Manual
Method 3:
A fixed IP address can also be assigned with the ARP command as follows:
1. Turn off the power to the JETPORT 5208 / JETPORT 5216.
2. Enter the following command:
arp -s <ip address> <
JETPORT 5208 / JETPORT 5216
's MAC
address>
Where the IP address that you assign is one suitable for the network
segment that the JETPORT 5208 / JETPORT 5216 resides on.
Note:
The JETPORT 5208 / JETPORT 5216's MAC address can be
found on its bottom panel.
3. Turn the power to the JETPORT 5208 / JETPORT 5216 back on.
4. In your browser, go to the IP address you just assigned and log in with
your Username and Password.
Note:
You must log in within 30 seconds after entering the arp command.
Therefore, it would be advisable to have your browser all set up to
go to the IP address beforehand.
5. Once you have logged in, go to
Network
, to set up the permanent IP
environment.